Konica Minolta 7020, Инструкция по эксплуатации

Страница: 82 / 266

3-38
4
5
6
Press
START
to start the interrupt copy-
ing.
When Interrupt copying is completed,
press
INTERRUPT
again.
The
INTERRUPT
LED goes out and
INTERRUPT
on the
Basic Screen returns to
SETTING
.
The settings of the initial job will be restored on the
Basic Screen.
Press
START
to resume copying.
CAUTION
When the finisher exit tray / inner tray/ paper
exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will oc-
cur.
When
CHECK
is pressed during
Interrupt copying, the informa-
tion displayed reflects the ini-
tial copy job settings. Check
mode will not display Interrupt
copy job information.
For particular jobs in progress, copying will cease only after
certain phases of the immediate operation are completed, as
indicated by the
INTERRUPT
LED conditions described below.
• Collectively printing image stored in memory
The LED blinks until one set of the current job is printed.
Then the LED remains steady for the temporary job performed
in Interrupt mode.
• Scanning originals into memory
The LED blinks until scanning is completed for all originals
placed in the document feeder. Then, the LED remains steady
for the temporary job performed in Interrupt mode.
• Scanning originals into memory while printing in Reserve
mode (see note 1)
The LED blinks until the copier completes the current print-
ing job, scans all originals placed on the document feeder,
and prints one set of the Reserved job. The LED remains
steady for the temporary job performed in Interrupt mode.
Interrupt Copying (continued)