manualshive.com logo in svg

Konica Minolta 7020, Инструкция по эксплуатации

Поделиться
Скачать
Konica Minolta 7020 Скачать руководство пользователя страница 22

1-8

 CAUTION: RECOMMENDATION OF PERIODIC CHECK

Be sure to check periodically the following points:

(1) The main lead or the power plug does not generate abnormal heat.
(2) The power plug is not inserted loosely or the lead is not cut or scratched.
(3) The earth wire is correctly connected.
(4) The power plug or the power outlet is not covered with dust.

If you find anything abnormal in the above items, stop using the machine and contact
your service centre.

 CAUTION: TONER

• Keep the toner cartridge away from children. The toner is nontoxic; however if you

inhale or contact with eyes by accident, flush with water and seek medical advice.

• Do not throw the empty toner cartridge into a fire. If it is thrown into a fire the toner

may ignite and cause a dangerous situation.

 CAUTION: PAPER

Check paper to be sure it is according to specifications outlined in Section 9.

 CAUTION: POWER SAVER AND WEEKLY TIMER

• During Power Saver mode the copier is still connected to the mains power supply

and power is still applied to certain areas of the machine. To avoid any unexpected
troubles turn the power OFF when not using the copier for long periods of time.

• When the Weekly Timer function is operating, turning power OFF will disable the

function.

 CAUTION: FIXING UNIT

The Fixing unit is internally very hot. To avoid getting burned, DO NOT TOUCH. Be
careful when withdrawing the fixing unit.

 WARNING: DRUM UNIT

The drum unit has a high voltage generated.
To avoid an electrical shock, DO NOT TOUCH.

 CAUTION: DISPOSE OF A DISUSED COPYING MACHINE

Do not dispose of this copier yourself. Contact your service centre, who can arrange
for its safe disposal.
If you change the place of installation, please contact your service centre.

 CAUTION: PAPER CAPACITY FOR THE EXIT TRAY

The exit tray capacity is max. 100 sheets/ 40 sheets (A3, B4 only). If a copy run of
more than 100/40 is required, be sure to remove the copies from the exit tray before
the maximum capacity is reached. Failure to do so will cause the copier to jam.

Requirements for Safe Use (continued)

Содержание 7020











































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды