Konica Minolta 7020, Инструкция по эксплуатации

Страница: 252 / 266

12-38
[12] Memory Switch (continued)
[11] ATS/APS SW (Tray 2)
This setting activates ATS and APS (platen and RADF) for Tray 2.
[12] ATS/APS SW (Tray 3)
This setting activates ATS and APS (platen and RADF) for Tray 3.
[13] ATS/APS SW (Tray 4)
This setting activates ATS and APS (platen and RADF) for Tray 4.
[14] Platen AMS
This feature allows the machine to automatically select the proper magnification ratio
when copy paper size is selected manually and an original is placed on the platen
glass.
[15] RADF AMS
This feature allows the machine to automatically select the proper magnification ratio
when copy paper size is selected manually and an original is fed from the RADF.
[16] Staple mode reset
When copying in the sort/staple mode, this setting allows the machine to automati-
cally reset to non-staple mode when the job in progress is completed.
[17] Key click sound
When this feature is Low or High, the machine activates a buzzer sound when the
touch sensitive screen is touched or any key is pressed. This confirms the machine
recognition of the selection.
[18] Job memory recall
This feature allows the machine to initialize using selections stored in job memory
No.15 when the power is turned on or the [AUTO RESET] key is pressed.
NOTE:
This function works only when job memory No.15 is registered.
[19] Sheet insertion
This setting allows selection of tray 1, tray 2, tray 3, tray 4, or Bypass as the source of
the inserted sheets.
[20] A5 original type
Selects orientation of A5 size originals.
Options: Landscape or portrait.
[21] Rotation
When turned on the feature allows the machine to automatically rotate an A4 original
image to match the manually selected paper size. For example, if an original is placed
in the RADF or on the platen glass in the A4R position and the A4 paper size is
selected, the machine will rotate the image to fit the A4 paper.