Konica Minolta 7020, Инструкция по эксплуатации

Страница: 244 / 266

12-30
[9] Weekly Timer (continued)
■
3. Machine Working Day Individual Set
Use this function to set the On/Off condition of the copier for a given month. Set the
On/Off condition for specific days; or collectively, for all Mondays through Sundays of
the given month. The default setting is collective: On for Mondays through Saturdays,
and Off for Sundays.
Procedure
1 Touch
9. Weekly Timer
on the Key Operator Mode Screen. Enter your 4-digit Weekly
timer master key code, then touch OK to display the Weekly Timer Setting Menu
Screen.
NOTE:
If an invalid Weekly timer master key code is entered, continue by entering the valid 4-digit code.
2 Touch
3. Machine working day individual set
to display the W.T. Working Day Indi-
vidual Setting Screen.
3 Use the procedure below to individually set the timer-active days.
(1) Touch the key for the timer-active day to be highlighted.
(2) Use the
▲
Upper arrow and
▼
Lower arrow keys to scroll to the desired month.
4 Use the procedure below to collectively set the timer-active days by the day of the
week.
(1) Touch
Block Set to display the W.T. Working Day Block Setting Screen.
(2) To set the Timer action ON, touch
ON
for the desired day.
To set the Timer action OFF, touch OFF for the desired day.
If you touch an already-highlighted key, no change will occur.
(3) Touch
OK
to complete the settings and return to the W.T. Working Day Individual
Setting Screen.
NOTE:
The selected days will be highlighted in black on the W.T. Working Day Individual Setting Screen
when restored, however, the working day individual setting has priority so that you can make
setting change for each day on that screen, if desired.
5 Touch
RETURN
to complete the settings and return to the Weekly Timer Setting
Menu Screen.
6 Touch RETURN to restore the Key Operator Mode Screen.
7 If no further changes are required, touch
RETURN
to restore the Basic Screen to
perform copying operations.