Konica Minolta 7020, Инструкция по эксплуатации

Страница: 230 / 266

12-16
[4] EKC (Electronic Key Counter) (continued)
■
1. Change EKC Data
Assign an ID No. for an individual or for a group, then create individual password(s)
for each user. You can specify a name and limit count for each password.
❒
EKC ID No.: ID No. from 000~127, designated by key operator.
❒
EKC Password: Unique 5-digit numeric code programmed by key operator for user.
❒
User Name: max. 24 characters
❒
Copy Limit: 0 to 999,999 copies
Procedure
1 Touch 4. E.K.C. on the Key Operator Mode Screen. Enter an 8-digit EKC master key
code, then touch
OK
to display the EKC Setting Menu Screen.
NOTE:
If an invalid EKC master key code is entered, continue by entering the valid 8-digit code.
2 Touch
1. Change E.K.C. data
to display the EKC Data Input Screen.
3 ID No. key is highlighted, enabling you to im-
mediately enter an ID No. Enter a 3-digit ID
No. from 000~127 using the keypad on the
control panel.
4 Touch Password key to highlight it.
Enter a 5-digit EKC password using the key-
pad on the control panel.
NOTES:
1. Do not enter “00000”. The initial EKC password
value is “00000”.
2. We recommend that you make a list of all EKC
passwords and ID Nos.
5 Touch Name to display the Name Input Screen.
If you do not specify the name, proceed to step
8
. This operation can be completed
normally without the name specified.