Konica Minolta 7020, Инструкция по эксплуатации

Страница: 251 / 266

12-37
12
Panel
Contrast
Paper Type
Power Save
Memory
Switch
Application
Customize
List Print
Key Operator
Data
Weekly Timer
Touch Panel
Adjustment
Density Shift
KRDS Host
Key Operator
Mode
System Initial
Preset Key
Copier Initial
EKC
Lock Job
Memory
Key Operator
Mode
[12] Memory Switch (continued)
The following functions can be provided by the Memory switch settings.
[1] Auto reset timer
Sets the time interval for the machine to reset to the initial condition.
Options: Off or 30/60/90/120/150/180/210/240/270/300 seconds.
[2] Auto/reset effect
Sets the condition of Copy mode, Copy density, Magnification, and Paper tray selec-
tion when the [AUTO RESET] key is pressed.
Options: Full-auto (factory setting) or Initial (key operator setting). Initial is the default
setting.
[3] Load RADF effect
Determines how the machine initializes when it is in the platen copy mode (non
RADF) and an original is inserted in the RADF feed tray.
Options: RADF and RADF + AUTO/RESET. The RADF option will activate the RADF
without resetting any other features. The RADF + AUTO/RESET option will activate
the RADF and reset the machine to the features programmed in memory switch #2.
[4] Non Image Area Erase
Establishes how the machine determines the image area of the copy.
Options: ON and APS/AMS only. ON option limits the copy image area to that of the
original. The APS/AMS only option limits the copy image area to that of the copy
paper sizes and the magnification automatically selected by the machine.
[5] RADF frame erasure
Sets the amount of frame erase when using the RADF.
Options: None, 1mm/ 2mm/ 3mm/ 4mm/ 5mm.
[6] Auto tray switch
During a copy job when ATS is on and multiple paper trays are loaded with the same
size paper, the machine will automatically switch to another tray when the initial tray
runs out of paper. Refer to memory switches 9 through 13 to activate this feature for
each tray.
[7] Platen APS
This feature allows the machine to automatically detect the size of the original placed
on the glass and select the same size copy paper. Refer to switches 9 ~ 13 to acti-
vate this feature for each tray.
[8] RADF APS
This feature allows the machine to detect the size of the original fed through the
RADF. Refer to switches 9 ~ 13 to activate this feature for each tray.
[9] ATS/APS (Bypass)
This setting activates ATS and APS (platen and RADF) for Multi-sheet bypass.
[10] ATS/APS SW (Tray 1)
This setting activates ATS and APS (platen and RADF) for Tray 1.