Konica Minolta 7020, Инструкция по эксплуатации

Страница: 148 / 266

8-18
CAUTION
When the finisher exit tray / inner tray / paper
exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they
exit; otherwise, mishandled paper will occur.
Scan the platen glass images.
Open the document feeder.
Position an original FACE DOWN on the platen
glass, then close the document feeder.
9
Touch SCAN on the Basic Screen.
Repeat steps
9
and
10
for all originals.
Entering Page Numbers
To insert more than one sheet at the same location, enter the
page number repeatedly.
For example, if insertion locations are [2/2/6], scanned platen
images will be inserted as follows:
The first scanned platen image will be inserted after page 2.
The second scanned platen image will be inserted directly af-
ter the first scanned Image insertion.
The third scanned platen image will be inserted after page 6.
PLACE AND SCAN THE
ORIGINALS ACCORDING
TO PAGINATION.
Please Be Reminded! Please Be Reminded!
10
• Memory overflow may occur
during scanning. See p. 5-10
to p. 5-11.
• Should memory overflow
occur frequently, it is recom-
mended that you contact
your Konica service centre
to extend the memory ca-
pacity in your machine.
HINTS
Press
START
.
The copier will start printing when ready for out-
put.
11
Inserting Images into Printed Sets (Image Insert) (continued)