Komatsu WA600-8, Руководство по эксплуатации и техническому обслуживанию, Страница: 82 / 554

For the method of displaying and replying the messages, see “MESSAGE DISPLAY (3-102)”.
End screen with operational advice
If there is any operational advice, the Operational Advice is displayed on end screen EE for 5 seconds, and then
the screen goes out.
For the Operational Advice when ending, see “SWITCH DISPLAY/NON-DISPLAY OF GUIDANCE WHEN KEY
IS OFF (3-66)”.
BASIC OPERATION OF MACHINE MONITOR WHEN STARTING SWITCH IS ON
WHILE OPERATOR ID INPUT IS SET
• If inputting ID number for operator identification function (with SKIP) is set, the opening screen AA switches
to ID number input screen LL (with SKIP) when the starting switch is turned to ON position.
• If inputting ID number for operator identification function (without SKIP) is set, the opening screen AA
switches to ID number input screen MM (without SKIP) when the starting switch is turned to ON position.
• On the ID number input screen LL (with SKIP) or MM
(without SKIP), input the already registered ID number,
and press ENTER switch (1). The screen changes to the
Check Before Starting screen BB. If you input an incorrect
ID number, press RETURN switch (2), and clear an input
character at a time.
On the ID number input screen LL (with SKIP), press
menu switch (3), and the screen changes to the Check Be-
fore Starting screen BB without inputting ID number.
REMARK
• Contact your Komatsu distributor for details of the method
of setting, changing, or canceling the operator identifica-
tion function.
• Depending on the set value of ID holding time in set items
of operator identification function, even if inputting ID num-
ber for operator identification setting is set, the ID number
input screen LL (with SKIP) or MM (without SKIP) may not
be displayed while the starting switch is turned to ON posi-
tion.
EXPLANATION OF COMPONENTS OPERATION
3-14