Komatsu WA600-8, Руководство по эксплуатации и техническому обслуживанию, Страница: 528 / 554

1.
Press the menu switch (1) on the standard screen.
2.
Press menu switch (1) and select “Load Meter” menu.
3.
Press UP switch (2) or DOWN switch (3) to select “Load
Meter Display”, and press ENTER switch (4).
4.
On the confirmation screen for “Load Meter Display”, press
UP switch (2) or DOWN switch (3) to select “OFF”, and
press ENTER switch (4).
The load meter is set to Non-display.
5.
To set the load meter back to Display, perform the steps 1
to 3, and select “ON” on the confirmation screen for “Load
Meter Display”.
REMARK
If the load meter is set to Non-display, following items alone ap-
pear on the menu screen of load meter.
• “Production Display and Reset”
• “Load Meter Display”
SHIFT SUBTOTAL SWITCH INTERLOCKING HORN SET
The horn sounds when pressing the load meter subtotal switch while “Subtotal SW Interlocking Horn Set” is
“ON”.
This is for resetting the loading display with the load meter subtotal switch, and for signaling with the horn to the
other operator of the dump truck during the loading work by using load meter at the same time.
HANDLE LOAD METER ATTACHMENTS AND OPTIONS
6-66