manualshive.com logo in svg

Komatsu WA600-8, Руководство по эксплуатации и техническому обслуживанию, Страница: 343 / 554

Поделиться
Скачать
Komatsu WA600-8 Скачать руководство пользователя страница 343

TRANSPORTATION

TRANSPORTATION PROCEDURE

When transporting the machine, choose the transportation method in reference to the weight and dimensions
shown in “SPECIFICATIONS (5-2)”.
Note that the “SPECIFICATIONS” (weight and dimensions) vary depending on the type of tire and bucket.

LOADING AND UNLOADING WITH TRAILER

k

k

 WARNING

This machine may need to be divided into components for transportation depending on the regulation.
When transporting the machine, consult your Komatsu distributor.
 

METHOD FOR SECURING MACHINE

1.

Set chocks at the front and rear of the tires to prevent the machine from moving.

2.

Fix the machine securely to the fixing position with chains
or wire ropes of proper strength.
In  particular,  fix  the  machine  securely  to  prevent  it  from
slipping sideways.

OPERATION

TRANSPORTATION

3-275

Содержание WA600-8











































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов