Komatsu HM400-5, Руководство по эксплуатации и техническому обслуживанию

Страница: 218 / 446

METHOD FOR CHECKING ELECTRIC WIRING
k k
CAUTION
• If fuses are frequently blown or if there are traces of short-circuiting on the electrical wiring,
promptly ask your Komatsu distributor to locate the cause of it and to make the repair.
• Keep the top surface of the battery clean and check the breather hole in the battery cap. If it is clog-
ged with dirt or dust, wash the battery cap to clear the breather hole.
NOTICE
Perform inspection for the piping of “battery”, “starting motor”, and “alternator” with particular care.
• Perform inspection to confirm that the fuses have no defect and their capacity is proper.
• Perform inspection to confirm that there is no disconnection or trace of short-circuiting in the electric wiring
and no damage to the coating.
• Perform inspection to confirm that there is no loose terminals, and tighten any loose parts if found.
• Check if there is any accumulation of combustible material around the battery, and remove such combusti-
ble material.
METHOD FOR CHECKING FUEL LEVEL, ADDING FUEL
k k
WARNING
• When adding fuel, be careful not to let the fuel overflow.
This may cause fire.
Always wipe up all the spilled fuel.
• If fuel spills onto dirt and sand sticking to the machine, remove it and dirt and sand together.
• Fuel is highly flammable and dangerous. Do not bring any open flame near fuel.
1.
Turn the starting switch to ON position.
2.
When the fuel level caution lamp lights up in red, check the
fuel level with fuel level gauge (1) on the machine monitor.
When the fuel gauge pointer reads the red range, the fuel
quantity is 106 ℓ or less.
The fuel level is low. Add fuel.
3.
After checking, return the starting switch to OFF position.
4.
Open fuel filler cap (F) of the fuel tank.
5.
Add fuel through the fuel filler port.
Fuel tank capacity: 525 ℓ
6.
After adding fuel, close fuel filler cap (F) of the fuel tank.
After finishing the work, fill the fuel tank.
MACHINE OPERATIONS AND CONTROLS OPERATION
3-158