Komatsu HM400-5, Руководство по эксплуатации и техническому обслуживанию

Страница: 74 / 446

REMARK
• Contact your Komatsu distributor for details of the method of setting, changing, or canceling the operator
identification function.
• Depending on the set value of ID holding time, even if inputting ID number for operator identification func-
tion is set, the ID number input screen LL (with SKIP) or MM (without SKIP) may not be displayed while the
starting switch is turned to ON position.
If inputting incorrect ID number for 3 times continuously, you cannot input ID number for 5 minutes. Wait for
more than 5 minutes, try inputting ID number again.
As long as ID number input screen is displayed, the engine cannot be started. If you forget the ID number and
cannot start the engine, confirm the person in charge of the machine.
NOTICE
Since the purpose of the operator identification function is neither security enhancement nor a protec-
tion against theft, it has no antitheft effect. Be careful not to use it for the purpose of security enhance-
ment.
Komatsu cannot accept any responsibility for any loss or damage resulting from the wrong use of ID or
unauthorized use of ID by a third person.
BASIC OPERATION OF MACHINE MONITOR WHEN STARTING ENGINE IN AB-
NORMAL SITUATION
When machine has abnormality
Starting screen AA is displayed for 2 seconds, and then failure display screen FF is displayed.
EXPLANATION OF COMPONENTS OPERATION
3-14