Komatsu HM400-5, Руководство по эксплуатации и техническому обслуживанию

Страница: 423 / 446

4) Click “Unit Setting” on screen “G2200”.
Screen “G2210” is displayed.
Do not click “User’s Comment”, since it is not used.
On screen “G2210”, you can select communication
ports (COM1, COM2), specify the place to save the
downloaded data, specify the file to be made, and se-
lect the unit for the made data.
For details, see the instruction manual provided for the
download software.
5) Check “Summary Data File” and “Cycle Data File” of
“File”.
In HM400, only “Summary Data File” and “Cycle Data
File” are handled.
Once a setting has been made, there is no need to set it again when performing the next download.
6) Click “ENTER” to return to screen “G2200”.
7) On screen “G2200”, click “BACK” to return to screen
“G2000”.
8) Click “Download” on screen “G2000”.
9) When screen “G2100” is displayed, click “Start”.
Downloading starts.
When downloading is finished, close the screen.
REMARK
Screen “G2101 < Down load - File ID” is displayed,
depending on the software version.
In this case, input the file ID, then click “OK”, and
downloading starts.
6.
After finishing downloading, be sure to return the cable.
ATTACHMENTS AND OPTIONS HANDLING PAYLOAD METER
6-11