Komatsu D65EXi-18, Руководство по эксплуатации и техническому обслуживанию

Страница: 45 / 184

The elevation recognized by the machine is displayed in
“Elev”.
16. Check the elevation recognized by the machine, and press
“Cancel”.
The screen returns to the main window.
17. Check that “elevation control key” (1) and “slope control
key” (2) are green and the machine direction on the control
box screen is the same as the actual machine direction.
If the machine direction on the control box screen does not
match with the actual machine direction, repeat the proce-
dure from step 8.
18. Set work equipment lock lever (3) and parking brake lever
(4) to LOCK positions (L).
REMARK
When work equipment lock lever (3) is set to LOCK posi-
tion (L), “slope control key” (2) becomes yellow, and (5)
and (6) are displayed alternately, however, it does not indi-
cate abnormality.
19. Stop the engine.
At this time, do not turn off the control box power supply.
20. After the engine stops, turn the starting switch to ON posi-
tion (B) again.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-31