Komatsu D65EXi-18, Руководство по эксплуатации и техническому обслуживанию

Страница: 104 / 184

The message screen is displayed.
8.
Press “Ok”, and apply the data to the current work.
9.
When adding a new control point, press “Add...” on the
“Control points” screen.
10. On “Control point” screen, press the input section for
“Name”.
11. Input the name of the new control point, by using the al-
phanumeric keyboard.
12. Input the information of the control point.
• “Site Coords”
Input “N” (Northing), “E” (Easting), and “Z” (elevation).
• “WGS84”
If correct GNSS coordinates are available, input the
“Lat”, “Lon”, and “Hgt” (Ellipsoid).
• Check box of localization
Check this when using for localization.
13. Press “Ok”.
The screen returns to “Control points” screen.
AJD02569
AJD02570
AJD02571
AJD02572
FILE MENU HANDLE CONTROL BOX
4-14