Komatsu D65EXi-18, Руководство по эксплуатации и техническому обслуживанию

Страница: 20 / 184

EXPLANATION OF COMPONENTS
The following is an explanation of devices necessary to operate the machine.
To perform suitable operations correctly and safely, it is important to completely understand methods of operat-
ing the equipment, and the meanings of the displays.
INTELLIGENT MACHINE CONTROL SYSTEM
CONTROL BOX
k k
WARNING
To prevent the blade from moving suddenly, turn on the control box power only when performing work
with “intelligent Machine Control”.
The control box has 2 functions, a function to set or adjust the design surface to be used for the blade automatic
control, and a function to display the GNSS satellite information. Touch the screen directly to operate it.
(1) Power ON switch (green)
(2) Power OFF switch (red) (3) USB port
For detail, see “HANDLE CONTROL BOX (4-1)”.
• Place the machine on a level ground under the open sky, turn on the power of base station, and then turn
on the control box power supply to perform the inspection.
• If the control box starts operation on the slope of which pitching angle (inclination in front or rear) or rolling
angle (inclination in right or left) is 20 ° or more, accuracy of it may deteriorate. Start the control box on a
level place.
• The power supply of the control box is not linked with the starting switch of the machine. Before starting
check or work with “intelligent Machine Control”, press power ON switch (green) (1) to turn on the control
box power.
Also, after finishing check or work with “intelligent Machine Control”, press power OFF switch (red) (2) to
turn off the control box power.
EXPLANATION OF COMPONENTS OPERATION
3-6