Kollmorgen AKMH, Инструкция по эксплуатации

Страница: 34 / 74

10.2 Use as directed
— The AKMH series of synchronous servomotors is designed especially for drives for
food & beverage, chemical, pharmaceutical machinery and similar with high require-
ments for hygienics and dynamics.
— The use of AKMH motors is allowed in applications with indirect contact to food and
beverage. The motors are acceptable for use in food splash zones. When applying
in these applications, the tubing option over the motor cable is required.
— The user is only permitted to operate the motors under the ambient conditions
which are defined in this documentation.
— The use of AKMH motors is allowed in environments with caustic acids and bases
with respect to the defined conditions in chapter 12.4 on page 44.
— The AKMH series of motors is exclusively intended to be driven by drives under
speed and / or torque control.
— The motors are installed as components in electrical apparatus or machines and can
only be commissioned and put into operation as integral components of such appa-
ratus or machines.
— The thermal sensor which is integrated in the motor windings must be connected
and evaluated.
— The holding brakes are designed as standstill brakes and are not suited for repeated
operational braking.
— The conformity of the servo system to the standards mentioned in the EC Declarati-
on of Conformity on page 73 is only guaranteed when the components (drive, motor,
cables etc.) that are used have been supplied by us.
EHEDG applications
— Mount the cable exit in the “down” or "side" region and install the cable with a
drip-loop to promote drainage after washdown.
— Use o-ring (mounting kit) for face or flange interface at motor mounting.
— Use sealed screws for motor mounting (mounting kit).
— Cover the shaft center hole with a sealed screw (mounting kit) if the shaft end is ex-
posed.
— Avoid direct contact of metal to metal when mounting or connecting the motor.
English - 34 Servomotors AKMH
Safety
08/2013
Kollmorgen
ENGLISH