manualshive.com logo in svg

Kollector KOL-RAID3 Series, Руководство по установке и эксплуатации, Страница: 60 / 64

Поделиться
Скачать
Kollector KOL-RAID3 Series Скачать руководство пользователя страница 60

56  

•

 Appendix E: Replacing the Controller Card 

XX102-00-00 Rev 203 KOL-RAID3 RAID Storage Systemd 

Appendix E: Replacing the Controller 
Card 

This document explains how to access, remove and install the controller board. 

The controller board is accessible by opening the cabinet. The controller board is located on top. Switch the power off and 
remove the power cord before servicing the controller board. 

 

Warning 

 

The electronic components within the disk array are sensitive to damage from ESD (Electro-Static 
Discharge). Appropriate precautions should be observed at all times when handling the array or its 
subassemblies. 

Remove the Controller Board 

Use the following instructions to remove the controller board: 

 

1.  Unplug both controller board cables. 
2.  With your fingers on the Slide Grip, slide the board toward the front of the cabinet. 

3.  Remove the seven mounting screws from the controller board. 
4.  Lift the board from the cabinet. 

Install the Controller Board 

Use the following instruction to install a controller board: 

1.  Slide the controller board mounting bracket toward the front of the cabinet. 

2.  Set the controller board on to the controller board mounting bracket  
3.  Insert and tighten the seven mounting screws from the controller board. 

4.  With your fingers on the Slide Grip, slide the board toward the back of the cabinet. 

5.  Plug in the controller board cables . 

 

Slide Grip 

Remove 

Install 

 

 
 

Figure 23.  Location of UltraTrak Controller Board 

 
 
 
 

Содержание KOL-RAID3 Series

































































Отзывы:

Нет отзывов