manualshive.com logo in svg

Kollector KOL-RAID3 Series, Руководство по установке и эксплуатации, Страница: 10 / 64

Поделиться
Скачать
Kollector KOL-RAID3 Series Скачать руководство пользователя страница 10

6  

•

 Introduction 

XX102-00-00 Rev 203 KOL-RAID3 RAID Storage Systemd 

Features and Benefits 

Feature 

Benefit 

Maximum fault tolerance 

Ensures uninterrupted data availability. 

Supports RAID levels 0, 1, 3, 5, 
0+1, 30, 50 and JBOD 

Allows system to be tuned for maximum performance. 
RAID 30 and 50 are only supported on the SX8000 and 
RM8000. 

S.M.A.R.T 

Warns of disk drive degradation and potential failure. 

Emulates standard SCSI-3 drive 
to host 

Compatible with all SCSI-3 or SCSI-2/LVD host adapters. 
No special operating system drivers used. 

Tagged command queuing up to 
64 commands 

Maximum performance in Multi-Threaded Operating 
Systems. 

Front panel LCD and LED 
indicators 

Easy setup and quick response to problems, ensuring 
maximum up time and manageability. 

Hot swap feature 

Allows a defective drive to be replaced without 
interrupting data accessibility to the host system. 

Hot-spare drive 

Maintains full fault tolerant integrity by automatically 
rebuilding the data from a failed drive to an installed hot 
spare drive. 

Automatic background data 
reconstruction when a drive is 
replaced 

Array is quickly back on-line with minimal user 
intervention. 

Redundant fans  

Load sharing and full operation even with a failed fan 

Redundant Power Supply 
 

Load sharing and uninterrupted operation with failure of 
one power supply. 

 

Содержание KOL-RAID3 Series

































































Отзывы:

Нет отзывов