XX102-00-00 Rev 203 KOL-RAID3 RAID Storage Systemd
Front Panel Interface
•
37
You will see the following choice after you have selected a RAID level:
Press SEL to Create
Press EXIT to Cancel
What you can do:
Press
SEL
:
Pressing
SEL
will create the array. Cycle the UltraTrak power switch
when told “Please restart UTRAK.”
Press
:
Does nothing.
Press
:
Does nothing.
Press
EXIT
:
Press
EXIT
to cancel this function and return to the
Configure Array
menu.
You will see the following message if all o f the drives are already configured:
No Free Disk
What you can do:
Press
SEL
:
Pressing
SEL
will save the array.
Press
:
Does nothing.
Press
:
Does nothing.
Press
EXIT
:
Press
EXIT
to cancel this function and return to the
Configure Array
menu.
View Drive Assignments
The View Drive Assignments mode lists each installed drive by model and identifies its array ID or that it is free (if it is not
assigned to an array). Each drive is displayed on one line.
1 MAXTOR Asgn In Ary 1
2 IBM Asgn In Ary 2
Where the values shown are simply examples.
3 MAXTOR Asgn In Ary 3
4 VENDOR-U Free
Press or
to move these items on the LCD.
What you can do:
Press
SEL
:
Does nothing.
Press
:
Moves the active message line up.
Press
:
Moves the active message line down.
Press
EXIT
:
Returns to the
Configure Array
menu.