46
•
Front Panel Interface
XX102-00-00 Rev 203 KOL-RAID3 RAID Storage Systemd
Mode
Select one of the following SCSI ID modes:
ID Selected
LUN
Selected toggles between these two when
SEL
is
pressed.
What you can do:
Press
SEL
:
Selects one of the following active functions:
ID
Select device
ID
mode.
LUN
Select
LUN
(logical unit number) mode.
Press
:
Moves the active message line up. (
Active is marked by *.
)
Press
:
Moves the active message line down. (
Active is marked by *.
)
Press
EXIT
:
Returns to the
Configure SCSI
menu.
When using
ID
mode, if you have multiple arrays within a unit, each array will use a separate SCSI ID. When using
LUN
mode, each unit will use a single SCSI ID, with the first array being LUN 0, the second array being LUN1, etc. Enable
Multiple LUN support in your SCSI adapter if you choose
LUN
mode. In most cases it is preferable to use
ID
mode.
SCSI ID
Select a SCSI ID between 0 and 15:
0
1 Selected
2
…
15
Press or
to move these items on the LCD.
What you can do:
Press
SEL
:
Selects one of the following active functions:
from a list of numbers
between 1 and 15.
Selects the
SCSI ID
– The word
Selected
appears next
to the selected ID.
Press
:
Moves the active message line up. (
Active is marked by *.
)
Press
:
Moves the active message line down. (
Active is marked by *.
)
Press
EXIT
:
Returns to the
Configure SCSI
menu.
Note
If you have multiple arrays and are using
ID
mode, be aware that
each array will use a SCSI ID. If, for example, you have created
two separate arrays and have selected
SCSI ID
4, array 1 would
have
SCSI ID
4 and array 2 would have
SCSI ID
5.