Kohler rada Exact-3 B, Руководство по эксплуатации продукта

Страница: 11 / 28

11
1057614-W2-D
Installation - Wall Recess
Figure 1
Temperature and flow knobs are also available
with a short lever.
Building-in Shroud
Foam Seal
Backplate
Concealing Plate
Mounting Plate
Flow Knob
Temperature Knob
Mounting
Bracket
Fixing Screw x2
Foam Seal
Sectional View of Wall Fixing
Mounting Bracket
Finish Thickness
Wall
8. The backplate assembly is provided with a foam seal on its rear face, which
mates with the wall surface and reduces the possibility of water penetration
into the recess. Should the wall surface or tiling be uneven, this seal will not be
fully effective and should be assisted / substituted by silicone sealant. Correctly
position the backplate.
9. Place the foam seal and the mounting plate in position. Secure the mounting
plate, foam seal and the backplate to the mounting bracket with the two fixing
screws (supplied).
10. Align the concealing plate into position over the backplate and press firmly
at each corner to secure. Refit the temperature and flow knobs. Refer to
COMMISSIONING .
15 mm Max.