Kohler rada Exact-3 B, Руководство по эксплуатации продукта

Страница: 12 / 28

12
1057614-W2-D
Installation - Reversal Of Mounting Bracket
Figure 2
Mounting Bracket
Mounting Bracket
Fixing Screw
Fixing Screw
Installation
-
Panel (less than 16 mm)
The Exact-3 B incorporates a mounting bracket, enabling the valve to be installed
through a laminated panel or shower cubicle.
The bracket must be in the correct orientation and mounted to the rear face of panels
of 2 - 15 mm finished thickness (refer to Figure 3).
1. Put the building-in shroud in the correct position on the wall and draw around
it with a pencil. Cut out the hole in the panel.
2. Using the valve and the building-in shroud as a template, mark and drill 2 fixing
holes to secure the mounting bracket in position.
3. Follow previous instructions for wall recess installation.
4. If access is available it may be preferable to make the initial valve/pipework
connections prior to securing the mixing valve to the panel.
5.
Mount the mixing valve securely onto rear of panel, with the panel fixing screws
(supplied).
6. Important!
Flush through the hot and cold supplies thoroughly before connection
to mixing valve.
7. Connect inlet and outlet pipework, checking that the hot and cold supplies have
been piped to the correct inlets, and check all connections are watertight.
8. Follow previous instructions for wall recess installation. Refer to COMMISSIONING.
Finish thickness 2 - 10mm Finish thickness 11 - 17mm
Panel Fixing
Screw Hole
Solid Wall
Fixing Screw
Hole