18
1285246-W2-D
Fit One Flow Regulator Per Outlet!
We highly recommend the fitting of a flow regulator for optimum temperature control and
showering experience.
For maintained (running) water pressure greater than 0.5 bar, installing a flow regulator can
help to reduce:
• Excessive shower force
•
Noise due to high or unequal water pressure
• Unstable supply temperature
• Cooler outlet temperatures due to the colder seasons
12 L/min (red)
to reduce excessive shower force and stabilise temperatures.
6 L/min (black)
for eco water conservation while showering.
Note:
In some circumstances such as when the incoming cold water temperature supply is
very low to a combination boiler a 9 l/min flow regulator may be required to improve the hot
water performance. Contact Mira Customer Service.
Note:
The 6 l/min flow regulator may affect the performance of some combination boilers
while the shower is running. Check with the boiler’s manufacturer before fitting.
DO NOT
fit a flow regulator if the maintained (running) water pressure is less than 0.5 bar or
the shower force is too low.
14
Information on Flow Regulators
Shower Spray
Handset*
Washer
Hose
*Subject to the fitting’s ability to accept the flow regulator.
Note: For the S valves, fit
the 12 l/min flow regulator
or 6 l/min flow regulator
into the handset as shown.
Note: For the ERD or Store products the
12 l/min flow regulator is pre fitted. For low
pressure systems, if more flow is required,
remove the flow regulator as shown.
Содержание Mira Agile ERD+
Страница 27: ...27 1285246 W2 D Notes...
