Kohler Mira Agile ERD+, Инструкция по установке и эксплуатации

Страница: 15 / 28

15
1285246-W2-D
Loosen the screws and remove the spirit
level and refit the pipe shroud to ensure the
pipes are aligned. Make sure the pipes do
not push back into the wall.
7 8
Integrated
Spirit Level
Hex Key
Pipe
Shroud
Screw
Pipe
Retaining
Screws
Ensure the pipes do not
push back into the wall.
To prevent the possibility of property water
damage the screws MUST be tightened
YOU MUST FULLY TIGHTEN
the pipe
retaining screws to clamp the pipes. Failure
to do so may result in water damage to your
property. Remove the pipe shroud.
Note: Only suitable for 15 mm pipe.
9
Retaining
Screw
Retaining
Screw
Backplate
Remove the two external retaining screws.
Use a suitable pair of pliers to remove the backplate from the valve, holding where shown.
Remove the retaining screw from the backplate.
Retaining
Screw