22
1285246-W2-D
Filter Cleaning
Isolate the water supplies and turn the
shower on to relieve the water pressure.
Turn the shower off.
Pull the control lever from the body then
remove the retaining screw with a 2.5 mm
hex key.
Pull the stop assembly from the body, then
unscrew and remove the large brass nut
from the body.
Ensuring correct orientation, “OFF” at
the top, refit the stop assembly and the
retaining screw to the body.
2
1
User Maintenance
WARNING! PLEASE OBSERVE THE FOLLOWING
TO REDUCE
THE RISK OF INJURY OR PRODUCT DAMAGE:
■
DO NOT
allow children to clean or perform any user maintenance
to the shower unit without supervision.
■ If the shower is not to be used for a long period, the water
supply to the shower unit should be isolated. If the shower unit
or pipework is at risk of freezing during this period, a qualified,
competent person should drain them of water.
3
4
Caution!
Take care
not to damage the
chrome surfaces.
Stop
Assembly
OF
F
OF
F
Содержание Mira Agile ERD+
Страница 27: ...27 1285246 W2 D Notes...
