二 安装龙头
1.
拧下自攻螺钉
(1)
,拔出灰浆
模套
(2)
。
2.
将龙头的进水软管和线束穿入
安装支架，由出线管穿出，将龙
头穿入安装组件上的螺钉，旋转
一定的角度，拧紧螺钉，尽量调
整龙头的出水方向对准脸盆。
3.
将装饰盖
(3)
由龙头的出水口穿
入，使用螺钉
(4)
固定。
2. Install Faucet
1. Remove the self-tapping screws (1)
and slide the slurry mold (2) off the
body.
2. Make faucet water pipe and wire
through mounting bracket, screw and
secure spout to the mounting bracket,
make sure the spout forwarding to
vessel.
3. Insert the escutcheon (3) into the
spout and secure it with screw (4).
用灰浆填埋槽道，在瓷砖上打好孔
张贴瓷砖后的墙面如图。
Fill slurry into the slot and drill holes
on tiles as shown in the figure.
1
2
4
3
1205259-2-A
5
