将安装组件放入槽内，并用自攻
螺钉固定。
保证安装组件的底部与完工墙面的距
离在
70
～
105mm
之间，如图（Ⅰ）。
保证暗装架组件的底部与墙面平行，
不能歪斜，如图（Ⅱ）。
一 安装暗装架组件
根据台盆大小确定安装方式，确保
龙头出水中心正对台盆中心位置。
1.
凿挖安装槽坑
根据安装尺寸图确定安装位置，凿
出槽坑，埋设供水管，暂不供水。
槽深
70
～
105mm
，尺寸如图。安
装位置应避免光源直射或反射进入
感应窗口，不能在感应器正对面有
易反射的物品（如镜子、光亮不锈
钢件及其他镜面物体等）；不能靠
近强烈紫外线或电磁场。
在安装尺寸位置钻孔，打入膨胀管。
2.
固定安装组件
1. Install Mounting Bracket Assy.
INSTALLATION
Determine installation method per
lavatory size, and make sure the center
of faucet outlet aligns with the center of
the lavatory.
1. Chisel out a Slot
Determine the installation lacation per
rough-in. Chisel out a slot with a depth
of 70~105mm and lay water supply
hoses. Turn off the water supply
temporarily. The dimensions are shown
in the figure. The installation area shall
be located at a place where no direct
light is allowed to enter or reflected into
the sensing window, where no objects
susceptible to reflection are placed in
front of the sensor (e.g., mirror, polished
stainless steel and other objects with
mirrored surface); where no strong
ultraviolet radiation or electromagnetia
field is found nearby.
Drew mounting hole and put in
expansion pipe.
2. Secure Mounting Bracket Assy.
Insert the mounting bracket assy. to the
slot and secure it with self-tapping
screws.
Ensure that the distance between the
bottom of the mounting bracket and the
wall ranges between 70~105mm as
shown in Fig. (I).
Ensure that the bottom of the mounting
bracket assy. is parallel with the wall as
shown in Fig. (II).
150
58
22
90
80
80
完工墙面
70~105
4