Control Stop Valve Operation
NOTE:
Use a flat-bladed screwdriver in order to remove the cap and
to adjust the valve position.
Use the following steps in order to open or close the control stop
valve:
Use the screwdriver to pry the vandal resistant cap from the
control stop valve.
Close the stop valve by turning the valve screw clockwise until
the end of travel is reached.
Open the stop valve by turning the valve screw counterclockwise
until the end of travel is reached.
When done, place the cap on the control stop valve and gently
tap into place using the screwdriver handle.
Wall Flange
Wall Tube
Control Stop
Stop Cap
1025497-5-B
6
Kohler Co.
