Remove the Solenoid
Perform the following steps to remove the solenoid from the valve
body:
Close the control stop valve (refer to the
″
Control Stop Valve
Operations
″
section).
Use the supplied hex head wrench to remove the screw from the
cap.
Remove the cap by lifting from the valve body.
Disconnect the plug to the solenoid by pulling the connectors
apart.
Temporarily store the cap and DC sensor assembly in a safe
place.
Use a Phillips screwdriver to remove both solenoid screws.
Grasp the solenoid and pull it off the valve body.
Ensure that the O-rings have been removed with the solenoid.
Body
Solenoid Assy.
Screw
Kohler Co.
11
1025497-5-B