A-61676 June 2010
5-3
2. Click
Start Shading
. The User Shading utility will guide you
through the necessary steps.
3. Clean the transport, rollers and imaging guides. See the section
entitled, “Cleaning inside the scanner” in Chapter 4. When
finished, click
OK
.
4. Place the shading paper in the feeder tray in the Landscape
position, then click
OK
. Wait until the message
Now Adjusting
is
cleared from the screen.
5. When the message
Finish Adjusting
is displayed, click
OK
.
NOTE: If the scanned images are still lined after the shading
adjustment and these lines are not eliminated even after
the imaging guides have been cleaned, the shading has not
been compensated properly. Clean the parts again and
perform the shading adjustment procedure again.
•
Restoring shading to the default:
you can restore shading
adjustment data to the default setting by clicking
Restore Default
on
the User Shading dialog box. Restore the default if the image quality
deteriorates or has not improved as a result of the shading
adjustment process.
Scanner Counter
The scanner counter can be used to keep track of the number of
documents scanned. The counters also provide a reminder for roller
cleaning and parts replacement.
•
System
— displays the number of pages scanned after the last
counter update.