A-61676 June 2010
4-3
Cleaning inside the
scanner
Clean inside the scanner at least once a week or after 20,000 sheets
have been scanned, whichever comes first.
NOTE: To determine the number of sheets scanned, use the
User
Utility. See the
Chapter 5, User Utility
for more information.
• Be sure the documents you are scanning are clean to minimize
frequent scanner dirt and dust build-up.
• When cleaning the rollers, hold the roller to prevent it from rotating,
then horizontally wipe the roller from side to side. Turn the roller as
you continue to wipe until the entire roller has been cleaned.
• If black or white lines appear on the scanned images, clean the
imaging guides as described in the next section.
• If paper jamming, marking, or multi-sheet feeding occurs frequently
even after cleaning, you may need to change the rollers as described
in the section entitled, “Replacing consumables” later in this chapter.
Cleaning the rollers,
sensors and imaging
guides
1. Turn the scanner off.
2. Push the ADF door release button to open the ADF cover.
ADF door
release
button
