2-2
A-61676 June 2010
Installing software
1. Turn on the host PC. You must log in as an
Administrator
.
2. Insert the
Sidekick
Resource Installation CD in the CD-ROM drive
and follow the installation steps.
3. After the software installation, press the Power switch to turn the
scanner on.
The LED will light and Windows will detect the scanner and launch
the Found New Hardware dialog box.
4. Follow the Windows New Hardware detect wizard.
NOTE: A compatibility message may be displayed. Click
Continue
Anyway.
5. Insert the
Sidekick
Resource Installation CD into the host PC.
NOTE: The drive letter will vary depending on where your
computer CD-ROM drive is located.
6. Click
OK
. If the files cannot be found, you will be prompted to
browse to locate the file.
NOTE: If Windows does not automatically install the
Sidekick
device drivers then insert the Installation CD and
Browse
to the
MiniDriver
folder on the CD.
7. When the installation is completed, click
Finish
.
8. Restart the host PC.
LED