3-6
A-61676 June 2010
Stop/Start button
operation
The Stop/Start button has different functions depending on how it is set
via the Advanced Settings dialog box. See the next section, “Making
selections on the Advanced Settings dialog box” for more information.
Emergency Stop mode
— if the scanner is running and feeding paper,
press the blue Stop/Start button to immediately stop the paper in the
scanner. This is the default mode of operation.
Start Feed mode
— to use this mode, the
Manual Feed Mode
on the
Advanced Settings dialog box must be set to
Start Button
. In this
mode, you can manually control the Start and Stop of the batch using
the Stop/Start button.
Multifeed Ignore
— allows one document to go through the scanner
without having the scanner stop for a multifeed condition.
Multifeed
Ignore
can be used with envelopes, documents with a Post-It note
attached, documents with photographs or any other document that is
comprised of two overlapping items. When the scanner has been set up
for Multifeed Ignore, it only works for the top document in the scanned
batch. If you want to ignore multifeeds for several documents, modify
the multifeed settings. See the next section, “Making selections on the
Advanced Settings dialog box” for more information.
If a multifeed occurs:
1. Remove the document from the ADF (Automatic Document Feeder)
by opening the scanner cover or pressing the Stop/Start button.
2. Press and hold the Stop/Start button for 2 seconds until the LED
alternates between green and orange. When this occurs, the
scanner is in
Multifeed Ignore
mode.
3. Place the document in which you want to ignore the multifeed on top
of the document stack.
4. The scanner will automatically begin scanning again or you can re-
initialize the scan within your scanning application.
To clear the Multifeed Ignore feature, open the scanner cover.