Kodak Professional RP 50, Руководство оператора

Страница: 92 / 198

Diagnostics and Troubleshooting
5-2 October 2002
Printer Error Messages
The following messages appear on the printer’s OCP when an equipment
problem occurs:
•
Error Messages –indicate an error condition that needs to be corrected
or resolved before you can resume operating the equipment.
(For example: “OUT OF PAPER”, “SUPPLY DOOR OPEN”)
Some error conditions may be easily corrected and some may require the
attention of a high level operator or even a service person.
•
Miscellaneous Error Messages –indicates a problem with the printer has
occurred that may or may not require you to call your service person.
More than one problem can occur at a time, however, only the message for the
first error will appear.
Manual or Automatic Reinitialization
The printer will reinitialize when you correct the problem that caused the error
code and press the Start key on the OCP within 30 seconds after closing the
printer door(s).
If you do not press the Start key within 30 seconds after closing the printer
door(s), the error message will disappear and the printer will automatically
reinitialize when you begin to print.
The reinitialization process includes:
•
Fogged Paper Cut —Fogged paper is cut from the lead edge of the paper roll
if the printer door was opened to correct an error.
•
Mechanical Self Check —A self-check of all mechanical systems in the
printer occurs.
•
Paper Check —A cut is made across the lead edge of the paper roll to ensure
a clean straight cut. The paper is then repositioned in the shoe.