Kodak Professional RP 50, Руководство оператора

Страница: 13 / 198

October 2002 xiii
About This Guide
This is an Operator’s Guide for the KODAK PROFESSIONAL RP 50 LED Printer
and Processor.
It provides step-by-step instructions for the operations you perform while using the
Printer and Processor as a system. It also includes procedures and information for
operating, maintaining, troubleshooting, and calibrating the system.
Also included in this guide are instructions for installing and using the various
software packages needed.
This guide is intended for personnel who operate this system. It assumes that you
can perform basic computer operations. MACINTOSH and
WINDOWS NT Platforms are supported in this guide.
This document also applies to the KODAK PROFESSIONAL LED II Printer 20P
and Processor.
Using This Guide
This guide is organized as follows:
Chapter 1 Introduction —describes and illustrates the KODAK
PROFESSIONAL RP 50 LED Printer and Processor. This
chapter includes general and introductory information for all
of the equipment.
Chapter 2 Using the System— explains how to use the printer and
processor. It includes the step-by-step instructions for daily
operation, from startup to shutdown.
Chapter 3 System Operating Procedures— provides an overview of
the OCPs and all procedures for operating both the Printer
and the Processor.
Chapter 4 Maintaining the Equipment— includes the information that
you need to properly maintain the printer and processor. All
maintenance procedures are categorized by frequency.
Chapter 5 Diagnostics and Troubleshooting— provides an error
code listing, solutions to common operational problems for
the printer, processor and calibration. It also provides
information for obtaining additional help.
Appendix A Ordering Equipment, Accessories, and Supplies—
provides ordering information for many associated items. It
includes information such as size, quantities, and catalog
numbers.