Kodak Professional RP 50 Скачать руководство пользователя страница 189

Страница: 189 / 198

Using the PHOTOSHOP Export Module

October 2002

E-11

There are no printers found attached to the host computer.
Check the connections and power to each printer.

Check that the connections to each printer, including the SCSI cables and power
cables, are properly connected.

The previously selected SCSI printer is no longer available or has been
changed.

This message occurs if the SCSI printer that you selected is no longer available.
Click

to open the print dialog box.

The selected printer is not available!
Check the connections and make sure the printer is turned on or, select
another printer.

This message occurs when the selected printer is not connected or is turned off
when

Print

is selected. Click

to return to close the error dialog box and return

to the print dialog box.

The number of border pixels exceed the maximum printer page size, reduce
the number of pixels.

This message occurs when the borders control causes the page limits in the printer
to be exceeded. Click

to close the error dialog box and return to PHOTOSHOP.

Other Problems

“On-Line Pages Deferred” appears, But Jobs Are Not Printing

If jobs were sent with the “Defer Print” option, the printer is waiting for more data
to fill the frame store. If you wish to print these jobs in the frame store:

Select the “Reprint” box in the Export Module.

2. Set the number of copies to 0.

3. Deselect the Defer Print key.

4. Click

Reprint

in the Export Module to instruct the printer to print the frames

that are currently being stored.

Press

On/Off Line

on the printer’s OCP to take the printer offline.

2. Press

Menu

3. Follow the instructions on the printer’s OCP.

Содержание Professional RP 50






































































































































































































Результаты поиска

Содержание Professional RP 50

Отзывы:

Похожие инструкции для Professional RP 50

Бренды по названию

Популярные бренды

Kodak Professional RP 50, Руководство оператора

Результаты поиска

Содержание Professional RP 50

Отзывы:

Похожие инструкции для Professional RP 50

Бренды по названию

Популярные бренды