A-61159 May 2002
4-1
4 Using the Scanner
Powering Up/Down
the Scanner
• Press the button on the scanner’s bottom right side to power it up.
or
• Press the button on the scanner’s bottom right side to power it down.
After you power up the scanner, the green indicator light flashes.
When the green indicator light stops flashing and the lamps have
been on at least 30 seconds, the scanner is ready to begin scanning.
IMPORTANT: Always power up the scanner to its ready state before
powering up the host computer.
Starting and
Stopping Scanning
Before you start scanning, make sure that the lamps have been on for
at least 30 seconds.
Scanning is controlled by integration software developed for your
application (the dialog box shown below is from the Kodak Digital
Science Diagnostic Software that is included with the scanner).
To start and stop scanning, refer to the documentation provided with
your integration software.