Kobold KMT-1, Руководство пользователя, Страница: 26 / 36

26
CONFIGURATION SOFTWARE
LIMITED LIABILITY
KOBOLD shall not be held liable for any damages or consequential damages (for example, but not restricted
to, loss of earnings, interruption of business, loss of information and data or any other financial losses) result-
ing from the installation, use or impossibility of use of an KOBOLD software product and any associated sup-
port services or non-performance of support services.
1. General
The configuration software, in the scope of supply, allows for a user-friendly adaptation of the flowmeter to the
application. In addition, the measurement values for flow and temperature can be calibrated / adjusted.
The system requirements for the installation and execution of the software are:
•
Windows XP with SP3, Windows Vista or Windows 7
•
.NET framework 3.5 with SP1
•
USB 2.0 interface
During setup there will be no installation of .NET Framework 3.5 SP1 – if the required version is not already
installed on the computer the following error message will appear at the start of the configuration software.
.NET Framework 3.5 SP1 can be installed using Windows Update.
2. Installation
In order to set up a smooth installation of the configuration software of the KMT, admin authorization for the
personal computer is required.
•
Place the CD-ROM in the drive tray of the computer.
•
At this moment the KMT should NOT be connected with the USB cable to the computer.
•
The setup program will start automatically with the Auto Run-function – in case the program does
not start automatically, one can start the setup software manually by starting Setup.exe directly.
•
The InstallShield-Wizard for the KMT configurator will be started.
•
Follow the instructions on the screen to install the software.
At first, the configuration software will be installed and then the installation of the USB driver activated – except
if the user has defined that USB setup is disabled.
The USB driver will be automatically installed the moment the first connection is made with the KMT.
The appearing dialog boxes can be dealt with the settings “No. do not download driver from the internet” and
“Install the hardware automatically”.
If the KMT configuration software and the USB driver are installed correctly, and the KMT is connected via the
USB interface with the personal computer, a connection “Silicon Labs
CP210x USB to UART Bridge” should have been created in the device
manager.
See: Start => Settings => Control Panel => System => Hardware => Device
Manager