Kobold KMT-1, Руководство пользователя, Страница: 17 / 36

17
5. CONTROL COMPONENTS
5.1. Jumper for Output
If the signal output is altered from relay to analogue output or vice versa, Jumper Output 1 has to be relocated.
If the analogue output is altered from a current to a voltage output or vice versa, Jumper Out-1 has to be
relocated.
5.2. Digital interface USB (for configuration)
The USB connector is behind the blind screw cap, at the side of the housing.
•
remove the blind screw cap with a screwdriver
•
plug in the USB connector
Install the configuration software, which is in the scope of supply.
Jumper Output 1
Jumper Out-1
signal output 1 = switching output
analogue output = current signal (e.g. 4-20 mA)
analogue output = voltage signal (e.g 0-10 V)
signal output 1 = analogue output
blind screw cap
USB-cable