Page 48 of 105
OPERATING MANUAL HPC & UMC4
14.1.5 Density
Depending on the settings in the DENSITY functional class, the process or reference density will be dis-
played. Density can only be displayed if the sensor is suitable for density measurement and has been
calibrated accordingly.
Density
XXX.X g/l
The operator can define the display unit in the DENSITY functional class using the
Density unit
function.
14.1.6 Temperature
After selecting the
Temperature
function, the following will be displayed:
Temperature
XXX,XX °C
The LCD shows the current temperature of the measured fluid in degrees Celsius, Fahrenheit or Kelvin.
14.1.7 Elapsed time
The LCD shows the operating time that has elapsed in d(ays), h(ours) and min(utes) since the system
was initialized and commissioned by the vendor:
Elapsed time
256 d 18 h 06 min
14.1.8 Mass flow + Counter forward
After selecting the
Mass flow + Counter forward
function, the current mass flow will be displayed in the
first line of the LCD:
XXX.X kg/h
XXXXXXXX.XX kg
The second line shows the value of the counter forward. The operator can define the display unit in the
FLOW functional class using the
Mass flow QM unit
function and the counter unit using the
Unit of coun-
ters
function in the COUNTERS functional class.
