manualshive.com logo in svg

Kobold Heinrichs Coriolis, Руководство по эксплуатации

Поделиться
Скачать
Kobold Heinrichs Coriolis Скачать руководство пользователя страница 10

 

 

 

Page 10 of 105

 

OPERATING MANUAL HPC & UMC4 

 

 

1.1 

Safety advisory for the user 

The present document contains the information that you need in order to operate the product described 
herein properly. The document is intended for use by qualified personnel. This means personnel who are 
qualified to operate the device described herein safely, including  
 

  electronics engineers,  

 

  electrical engineers, or  

 

  service technicians  

 
who are conversant with the safety regulations pertaining to the use of electrical and automated technical 
devices and with the applicable laws and regulations in their own country.  
 
Such personnel must be authorized by the facility operator to install, commission and service the product 
described herein, and are to read and understand the contents of the present operating instructions be-
fore working with the device. 

1.2 

Hazard warnings 

The purpose of the hazard warnings listed below is to ensure that device operators and maintenance 
personnel are not injured and that the flow meter and any devices connected to it are not damaged. 
 
The safety advisories and hazard warnings in the present document that aim to avoid placing operators 
and maintenance personnel at risk and to avoid material damage are prioritized using the terms listed 
below, which are defined as follows in regard to these instructions herein and the advisories pertaining to 
the device itself. 

1.2.1  Danger    

means that failure to take the prescribed precautions 

will result

 in death, severe bodily injury, or substan-

tial material damage. 

1.2.2  Warning 

means that failure to take the prescribed precautions 

could result

 in death, severe bodily injury, or sub-

stantial material damage. 

1.2.3  Caution 

means that failure to take the prescribed precaution could result in bodily injury, or a material damage. 

1.2.4  Note 

means that the accompanying text contains important information about the product, handling the product 
or about a section of the documentation that is of particular importance. 

Содержание Heinrichs Coriolis










































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды