34
8.1 Swiveling the HV 261 Belt-Grinding Unit into working position
When not working with the HV 261 Belt-Grinding
Unit, it is swiveled into the rest position.
The wet-grinding belt is thus freely accessible.
To bring it into working position, swivel the Belt-
Grinding Unit to the left until it touches both stop
pins (8-2/1).
8. Commissioning HV 261
All work must be performed by authorized trained personnel.
Observe the locally applicable safety and accident prevention regulations.
There is a risk that hands, hair, and clothing may be pulled in while the
grinding machine is switched on.
Serious injury may result. Wear personal protective equipment.
CAUTION
Figure 8-2
Swiveling the HV 261 into working
position
Figure 8-1
HV 261 in rest position
1
1
