37
The grinding plate (9-3/2) is placed over the spacer
disc (9-3/1).
The cylindrical pin (9-3/3) of the spacer disc (9-3/1)
must engage in the hole (9-3/4) of the grinding
plate.
If the grinding plate has several locating holes,
mount it so that the cutting segment at the knife
tip is ground first.
Turn the grinding lever (9-4/1) clockwise onto the
locating bolt and tighten it slightly so that the
grinding plate can still be moved.
9.1.3 Adjusting the swivel range of the grinding plate
Swivel the grinding plate to the right until the left
edge of the grinding plate comes to rest approx.
10 cm to the right of the grinding belt.
Tighten the grinding lever (9-5/1) clockwise.
Figure 9-3
Mounting the grinding plate
2
1
4
3
9. Operating the HV 261
Figure 9-4
Slightly tightening the grinding lever
1
Figure 9-5
Setting the swivel range
1
