24
6.1 Mounting the HV 207 Swivel Arm
The HV 207 Swivel Arm is already mounted as
standard. If another grinding device, e.g. the
HV 203 Universal grinding arm, is mounted,
proceed as follows:
Use an hexagon screwdriver, width across flats
6 mm, to loosen the M 10 countersunk screw
(6-1/1) counterclockwise.
Pull off the mounted Universal grinding arm from
the grinding unit.
Place the HV 207 Swivel Arm (6-2/1) on the grind-
ing unit (6-2/2) from the right and secure it with
the M10 countersunk screw (6-1/1).
6. Commissioning HV 207
All work must be performed by authorized trained personnel.
Observe the locally applicable safety and accident prevention regulations.
There is a risk that hands, hair, and clothing may be pulled in while the
grinding machine is switched on.
Serious injury may result. Wear personal protective equipment.
CAUTION
Figure 6-2
Mounting the HV 207 Swivel Arm
1
2
Figure 6-1
Removing the HV 203 Universal
grinding arm
1
