KNECHT HV 207, Руководство по эксплуатации

Страница: 4 / 48

5
4. Transport 22
4.1 Transport aids 22
4.2 Transport damage 22
4.3 Transport to another installation site 22
5. Installation 23
5.1 Selection of qualified personnel 23
5.2 Installation site 23
5.3 Settings 23
5.4 Initial start-up of the grinding units 23
6. Commissioning HV 207 24
6.1 Mounting the HV 207 Swivel Arm 24
7. Operating the HV 207 25
7.1 Grinding sickle-shaped knives on the grinding wheel 25
7.1.1 Attaching the SP 107 grinding plate 25
7.1.2 Clamping the knife 29
7.1.3 Positioning the knife on the grinding wheel 30
7.1.4 Setting the grinding angle 31
7.1.5 Grinding sickle-shaped cutter knives (convex cutting edge) 32
8. Commissioning HV 261 34
8.1 Swiveling the HV 261 Belt-Grinding Unit into working position 34
9. Operating the HV 261 36
9.1 Grinding sickle-shaped cutter knives on the wet-grinding belt
(convex cutting edge)
36
9.1.1 Setting the grinding angle 36
9.1.2 Mounting the grinding plate 36
9.1.3 Adjusting the swivel range of the grinding plate 37
9.1.4 Clamping cutter knives 38
9.1.5 Basic function of the HV 261 locking mechanism 39
9.1.6 Bringing the HV 261 Belt-Grinding Unit into adjustment position 40
9.1.7 Grinding cutter knives 42
9.1.8 Deburring and polishing cutter knives 44
Table of Contents