RPTR-OBA/734
Installation Manual
REV: B (04/25/2022)
29
Figure 32- RAPTOR-311 Install Orientation
4.
Slide RAPTOR-311 under the clip-on nut (via the square hole) to set it into place along the frame
rail. The -311 bracket should lie in-between the vehicle frame & the clip-on nut as shown in the
below figure.
a.
Alternate: Slide H14 onto the frame rail lower bracket mounting point (ref. the above
Figure 31
BLUE
section) to facilitate RAPTOR-311 installation.
Figure 33- RAPTOR-311 Installed via Lower Mounting Point
