RPTR-OBA/734
Installation Manual
REV: B (04/25/2022)
17
2.
Install onto the upper threads of the brackets (Item 21 & 22) as shown below.
Figure 10- RAPTOR-210 (Left) & -211 (Right) – Straps are shown pre-bent
3.
If straps are not pre-bent, place Item 5 (Air Tank) onto the brackets RAPTOR-210 & -211 (Item 21
& 22).
4.
Place hardware H1, H7, & H9 in the stacking order above, onto the slotted hole in the Tank strap
& form the strap to match the contour of the tank.
5.
As you form the strap, align the fastener to the bottom threaded hole on the bracket and fasten
the strap & tank completely to the bracket.
6.
Repeat for the second strap.
7.
Once the straps are formed, Remove the lower fasteners and remove the tank. Set aside for
future use. Keep the upper fasteners in place, securing the straps to the brackets.
