RPTR-OBA/734
Installation Manual
REV: B (04/25/2022)
23
H4 & H11 secure the RAPTOR-210 bracket from inside the frame rail.
2.
Insert H4 & H11 (stacked) into the square holes and orient the threads to face outside of the
frame rail through the circular hole. Reference the following figure.
Figure 21- Example of Hardware Setup
3.
Place RAPTOR-210 onto the H4 bolt and install the remaining hardware H10, H8, H13 onto the
bolt and loosely fasten to allow the installation of the hardware in the second location.
4.
Repeat this process for the second hole location
Note: Ensure the folded tabs of RAPTOR-210 are facing the front of the vehicle as
shown below.
Figure 22- RAPTOR-210 Installation
5.
Torque hardware to 75-88 in-lbs.
