RPTR-OBA/734
Installation Manual
REV: B (04/25/2022)
31
7.6
Rear Horn Bracket Installation
The following brackets & hardware are used in this step:
•
Item 23 = RAPTOR-310
•
Item H4, H6, H12 – Qty: 1 each
•
H8, H10, H11, H13 – Qty: 2 each
Use the below stacking order for installation of the RAPTOR-310 bracket.
Figure 36- RAPTOR-310 Hardware Stacking Order - Frontmost Hole (Left), Rearmost Hole (Right)
1.
Locate the RAPTOR-310 mounting holes on the driver side frame rail below the rear door,
slightly forward of the front most leaf spring bolt as shown below.
Figure 37-RAPTOR-310 Mounting Holes
2.
Insert H6 & H12 (stacked per above order) from inside the frame, outwards, into the rearmost
hole (closest to front leaf spring bolt).
